- Patented MicroPlate heat exchanger for optimum efficiency and durability
- WOLF supplies the entire system: Heat generator including control & flue system + cylinder + floor station
- Plug&Seal: Quick, extremely leakproof push-fit connections with no need to tighten screw joints
- Tidy: The RatioFlow all-in-one controller for maximum convenience. Includes a differential pressure controller, EnEV-compliant zone valve with actuator, hot water thermostat and venting
- Cold heat exchanger: The heat exchanger is cooled after water is drawn off for maximum efficiency and protection against Legionella bacteria
- Optional ULTRA stainless steel brazed heat exchanger for demanding water conditions
- Differential pressure controller as standard for optimum operation of the entire system
- LT variants with bathroom radiator connection as standard
- Domestic hot water & heat meter adaptors suitable for continuous operation
- Quick and cheap to install for renovation projects
- Thermosiphon to prevent undesirable gravity circulation
- Easy installation: No gas, hot water or circulation piping in the apartment
- Compliance with DVGW bulletin no. 551 and German Drinking Water Ordinance (TrinkWV)
- ULTRA variants contain a shock arrestor as standard to prevent pressure fluctuations from the piping
Floor station
CAT
Innovation meets reliability
Floor stations are compact appliances that draw hot water from the heating circuit on demand and use it to heat drinking water directly at the draw-off point using a heat exchanger. In general, they provide efficient decentralised heat distribution and hygienic DHW heating. The new WOLF CAT-37/45/55 floor station can be connected to a variety of central heat generators and combines centralised convenience with decentralised DHW heating. Its most appealing feature is hot water at a consistent temperature thanks to the WOLF RatioFlow controller.
CAT37
CAT45
CAT55
The WOLF CAT floor station is available in 10 basic versions with or without a thermal insulation cover for 2-line systems – with extensive standard equipment and optional accessories.
- CAT-HT version for high-temperature circuits in 3 DHW output ratings
- CAT-LT with mixing circuit for low-temperature heating circuits including high-temperature connection in 3 DHW output ratings
CAT
Station
Power supply (kW)
DHW draw-off capacity (l/min)
Supply temperatures flow/return (°C)
DHW temperatures CW/HW (°C)
Supply flow rate [l/h]
CAT-37
37.0
15.2
65/19.1
10/45
707
CAT-37
37.0
13.3
65/22.4
10/50
762
CAT-45
45.0
18.4
65/17.6
10/45
833
CAT-45
45.0
16.1
65/20.6
10/50
890
CAT-55
55.5
22.5
65/14.0
10/45
950
CAT-55
53.0
19.0
65/15.8
10/50
950
CAT-55
42.0
17.2
55/16.3
10/45
950
CAT-55
33.7
13.8
50/19.1
10/45
950
Overview of benefits
- Worry-free solution: Extensive range of basic equipment included - preselected by WOLF
- Differential pressure controller as standard for optimum operation of the entire system
- Dirt trap in primary circuit to protect the station and downstream installations from dirt
- Easy, low-cost consumption billing with heat meter; simple for residents to monitor their consumption
- Lower heat losses: Lower hot water utility charges than with central DHW heating
- Minimal maintenance
- Easy replacement of heat generators without needing additional construction measures
- Rear EPP insulation as standard + optional front insulation
- Adjustable SummerBypass circulation bypass as standard: Quick supply of DHW all year round
- Hot water thermostat as standard: The comfort of consistent DHW temperatures even when flow temperatures fluctuate
- Discreet appearance and compact, slim design (150 mm)
- Easy, low-cost consumption billing with heat meter; simple for residents to monitor their consumption
- Stringent water hygiene and protection against bacterial growth; generally makes Legionella tests unnecessary
- Consumers can decide independently when and how much heating to use
The WOLF CAT floor station is available in 10 basic versions with or without a thermal insulation cover for 2-line systems – with extensive standard equipment and optional accessories.
- CAT-HT version for high-temperature circuits in 3 DHW output ratings
- CAT-LT with mixing circuit for low-temperature heating circuits including high-temperature connection in 3 DHW output ratings
Extra-durable ULTRA variant available with 2 different output ratings.
- Copper-brazed plate heat exchanger COPPER 37/45/55 kW
- RatioFlow all-in-one controller
- Plug&Seal connectors
- Differential pressure controller (hot water + heating)
- SummerBypass circulation bypass function
- Thermostatic hot water adjustment
- Thermally insulated base plate
- Metal meter adaptors (cold water meter, heat meter)
- Cold water outlet
- Six variants for mixed heating circuits
- Including High efficiency pump
- Including actuator for zone valve and safety thermostat
- Pure stainless steel plate heat exchanger ULTRA 37/45/55 kW
- Shock arrestor
All variants also available as CIRC variants with circulation kit
- Integrated installation kit with high-efficiency pump
- 10-bar safety valve as standard
- Distributor for 2-12 heating circuits, manual or wired, including individual room temperature control
- Six flush-mount and surface-mount cabinets
- Front insulation cover
- Room thermostats